SOUTH BEND G56-OFEK DYNA MAX UPGRADE CLUTCH KIT
2005.5-2018 DODGE RAM CUMMINS 5.9L/6.7L WITH 6-SPEED G56 TRANS. (450 HP, 900 FT. LBS.)
Supports 450 HP & 900 Ft. Lbs. Torque
The South Bend G56-OFEK Dyna Max Upgrade Clutch Kit for your 2005.5-2018 Dodge 5.9L & 6.7L Cummins G56 will stand up to added horsepower and torque from aftermarket performance upgrades such as a performance programmer or module. When choosing a clutch kit it is very important to match the appropriate horse power and work load. For the MU0090 Rally and MU0090 Con O are capable of handling the horse power and torque ratings provided in our listings, but if the truck is used for heavy hauling when coupled with torque ratings exceeding 600 ft. lbs. damage to the clutch disc WILL occur. The cause and effect is the 12 1/4" disk does not provide enough dampened area to absorb the added torque of the Cummins along the heavy hauling. These two clutch kits are fine for light towing and performance.
If you are going to be towing in excess of 8,000 lbs. while exceeding 600ft lbs of torque you must go with the MU 13-1.25 Con O, OFE or FE. This will offer a clutch that will handle heavy towing with vehicles equipped with the higher torque ratings. This clutch ONLY applies to trucks with 5 speed transmissions and early 6 speeds that are not equipped with the HO engine. If a 12 1/4" clutch is purchased and gets destroyed at the dampened portion of the disc, warranty WILL NOT be granted.
- Manufacturer Name South Bend Clutch
- Shipping Weight 96.00 lb.
- Shipping Length 20 in.
- Shipping Width 20 in.
- Shipping Height 8 in.
- Fuel Type Diesel
- Warranty Yes
- Warranty Info 90 Day
- Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
|Dimensions||20 × 20 × 8 cm|