70 GALLON REPLACEMENT FUEL TANK FOR 2011-2016 FORD POWERSTROKE 6.7L CREW CAB LONG BED
S&B’s 70 gallon fuel tank replaces the OEM 35 gallon fuel tank. The replacement tank sits 3″ below the OEM fuel tank shield and hold approximately 70 gallons of fuel. The float’s empty position in the S&B Tank is the same as the OEM tank. Since the bottom surface area on the S&B Tank is larger, the 70 Gallon tank with have a greater fuel reserve.
WARNING For Those Using In-Bed Fuel Tanks
On S&B and OEM diesel fuel tanks, there are one or more rollover valves. The rollover valve uses a float/weight to close the valve when the float is immersed in fuel. This prevents fuel leakage in the event of a rollover. Gravity feed tanks or electronically controlled feed tanks can overfill the S&B or OEM tank. If/when the tank is overfilled, the rollover valves will prematurely close. Without the required vapor space in the tank, this violates the “overfill restriction” requirement of 49 CFR 393.76(12)(i). An overfilled tank can lead to a pressurized fuel tank, leaking, and tank failure.
Therefore, the use of a gravity feed tank or electronically controlled transfer tanks (that allow the S&B tank to overfill) in conjunction with a S&B Tank is dangerous and will void the S&B Tank warranty.
DISCOVER HOW S&B TANKS CAN HELP YOU!
Save Time. Go Further. Get More Out of Your Truck. Being stuck with only a 35 gallon tank isn't fair. You spend more time looking for fuel stations, are stuck paying high fuel prices, and are slowed down by this inconvenience.
TRANSFER PUMP & AFTERMARKET LIFT PUMP
Transfer Pump: Add on our GPI Transfer pump kit. Save space in your bed and pull fuel out of your large S&B Tank.
Aftermarket Lift Pump: Want to install an aftermarket lift pump? Our patent pending integrated sump design allows for easy install.
EASY RECALIBRATION FOR DISTANCE TO EMPTY
We teamed up with EZ Lynk to make adjusting your Distance to Empty (DTE) free and easy. EZ Lynk AutoAgent 2
SAVE TIME. GO FURTHER. GET MORE OUT OF YOUR TRUCK.
The tank sits 3" below the OEM fuel tank shield. Install can be done in 2-3 hours and does not require any cutting, drilling or modification.
|Dimensions||82 × 20 × 22 cm|