318-704-0662

eatractorrepair@gmail.com

60 GALLON REPLACEMENT FUEL TANK FOR 2017-2021 FORD POWERSTROKE 6.7L CREW CAB SHORT BED

$1,249.00

This tank hold approximately 60 gallons of fuel. The float’s empty position in the S&B Tank is the same as the OEM tank. Since the bottom surface area on the S&B Tank is larger, the 60 Gallon tank with have a greater fuel reserve.

According to the Ford TSB 17-0046. If your truck has a build date prior to 3-20-17. Replace the fuel Level Sender Resistor Card Assembly with Ford part # HC3Z-9A299-N.

TANK TYPE   MIDSHIP
S&B CAPACITY (APPROXIMATE)   60 GALLONS
WEIGHT (DRY)   50LBS
GROUND CLEARANCE COMPARE TO OE TANK   1.75″ LOWER
SUMP   YES
DRAIN   YES
SENDING UNIT   OEM
STRAPS INCLUDED   YES
COMPATIBLE WITH OE SKID PLATE   YES
COMPATIBLE WITH GOOSENECK AND 5TH WHEEL   YES
TRANSFER PUMP READY   YES
EMBEDDED FITTING THREAD SIZE   1/2″ NPT
DIMENSIONS   76.02″ X 20.69″ X 19.08″

WARNING For Those Using In-Bed Fuel Tanks

On S&B and OEM diesel fuel tanks, there are one or more rollover valves. The rollover valve uses a float/weight to close the valve when the float is immersed in fuel. This prevents fuel leakage in the event of a rollover. Gravity feed tanks or electronically controlled feed tanks can overfill the S&B or OEM tank. If/when the tank is overfilled, the rollover valves will prematurely close. Without the required vapor space in the tank, this violates the “overfill restriction” requirement of 49 CFR 393.76(12)(i). An overfilled tank can lead to a pressurized fuel tank, leaking, and tank failure.

Therefore, the use of a gravity feed tank or electronically controlled transfer tanks (that allow the S&B tank to overfill) in conjunction with a S&B Tank is dangerous and will void the S&B Tank warranty.

DISCOVER HOW S&B TANKS CAN HELP YOU!

Save Time. Go Further. Get More Out of Your Truck. Being stuck with only a 34 gallon tank isn't fair. You spend more time looking for fuel stations, are stuck paying high fuel prices, and are slowed down by this inconvenience.

TRANSFER PUMP & AFTERMARKET LIFT PUMP

Transfer Pump: Add on our GPI Transfer pump kit. Save space in your bed and pull fuel out of your large S&B Tank.

This tank features a built in sump which can be used for aftermarket lift pump installation, if desired. S&B recommends aftermarket lift pumps be installed according to the pump manufacturer's instructions only. The S&B sump will not cure typical "1/4 tank issues"  common with aftermarket lift pumps.

EASY RECALIBRATION FOR DISTANCE TO EMPTY

We teamed up with EZ Lynk to make adjusting your Distance to Empty (DTE) free and easy. EZ Lynk AutoAgent 2

SKID PLATE

If you don't have a skidplate on your truck already, no problem! But if you do, we designed the S&B Tank to allow you to reuse the factory skidplate. We also designed a smaller, factory style skidplate to cover the front of the larger S&B Tank.

Additional information

Weight 50 kg
Dimensions 77 × 21 × 20 cm

Reviews

There are no reviews yet.

Be the first to review “60 GALLON REPLACEMENT FUEL TANK FOR 2017-2021 FORD POWERSTROKE 6.7L CREW CAB SHORT BED”

Your email address will not be published.